profile | register | search | main site
|Forums | Rap N Tap Clubhouse - Basic Crystal Radio Fun! | Diode Threshold Voltage||Post Reply||Send Topic To a Friend|
|gzimmer||Posted - 17 September 2013 1:50 |
I think I've found the reason for the Diode Threshold myth:
Because the diode's forward V/I curve is essentially Exponential, it is difficult to deal with using simple maths.
One way of handling this is to break the curve into a number of separate straight-line segments. This is known as piece-wise approximation.
Each segment consists of a resistor in series with a voltage source. With many of these segments in parallel you can get a good approximation of an Exponential curve.
For a simple calculation, just one segment is often sufficient. This would be one resistor in series with a voltage source.
So students are taught to calculate the diode current by putting a voltage source in series with the existing circuit resistance.
Unfortunately they then take the single voltage offset as gospel. I know that I did, way back when...
for graph example see...
|_J_||Posted - 23 September 2013 0:26 |
To me, I suspect it may be the graph.
If you graph a 1N34 on a 1:1 scale it really looks like it has a knee at .2 volts. The curve is fairly straight to the negative side of that. It goes straight up to the positive side, so straight it is hard to imagine there is anything going on in that "straight" line.
It helped me to see the same knee-looking bend in the plain e**x curve. Having studied calculus, I know e**x has no point of max curvature, no knee. Without the perspective of calculus I can see why people prefer to believe "their eyes," I probably would do the same?
|gzimmer||Posted - 23 September 2013 2:9 |
My perspective is that every technician is taught that there is a threshold voltage with diode (or transistor) junctions.
For instance read the Wickipedia article at
"Semiconductor diodes begin conducting electricity only if a certain threshold voltage or cut-in voltage is present in the forward direction (a state in which the diode is said to be forward-biased). The voltage drop across a forward-biased diode varies only a little with the current"
It's something students are taught from day one...
|golfguru||Posted - 23 September 2013 6:25 |
|gzimmer||Posted - 25 September 2013 7:41 |
Another text which discusses whether the Threshold Voltage exists or not....
They refer to it as the "Corner Model"
It seems to support my post above..
Click Here To Close Thread, Administrators & Moderators Only.
Show All Forums | Post Reply